23
EN
Operating and assembly instructions HRD FU-ATEX
www.elektror.com
9016330 01.20/08
8 DECLARATION OF INSTALLATION CONFORMITY PURSUANT TO ANNEX II 1 B
DECLARATION OF CONFORMITY IN ACC. WITH EVPG (ENERGY CONSUMPTION
RELEVANT PRODUCTS ACT).SECTION 4 PARAGRAPH 1
As manufacturer,
Elektror airsystems gmbh
Hellmuth-Hirth-Strasse 2
D-73760 Ost
fi
ldern
herewith declares that the product, to which this declaration relates, complies with the following essential requirements
of the Machinery Directive
(2006/42/EC)
.
Description of the partially completed machine:
ATEX high pressure blower HRD 1T FU, HRD 14T FU, HRD 16T FU, HRD 2T FU, HRD 60 FU, HRD 65 FU, HRD 7 FU
with the following designation for gas:
II 3G Ex h IIB T4 Gc /
II 3G Ex h IIB T3 Gc /
II 3G Ex h IIC T3 Gc
II 3G Ex h IIC T4 Gc /
II 2G Ex h IIB T3 Gb /
II 2G Ex h IIB T4 Gb
II 2G Ex h IIC T4 Gb
with the following designation for dust:
II 3D Ex h IIIC T125°C Dc /
II 3D Ex h IIIC T135°C Dc
with the following designation for gas
and dust:
The serial number and year of manufacture can be found on the rating place and the corresponding delivery note.
Description of the essential requirements of the directives, with which the partially completed machine complies:
Machinery Directive
(2006/42/EC)
, Annex I, Articles 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.5.1, 1.6.1, 1.7.1, 1.7.3
Electromagnetic Compatibility Directive
(2014/30/EU)
Directive on equipment and protective systems intended for use in potentially explosive atmospheres
(2014/34/EC)
The partially completed machine described here continues to ful
fi
l the protective regulations of the
Low Voltage Directive
(2014/35/EC)
according to Annex I No. 1.5.1 of the Machinery Directive.
The commissioning of the partially completed machine is not permitted until it has been veri
fi
ed that the machine in which the partially
completed machine is to be installed, complies with the provisions of the Machinery Directive
(2006/42/EC)
.
The following harmonised standards have been applied:
DIN EN ISO 12100 2011
Safety of machinery - General principles for design - Risk assessment and risk reduction
ISO 14694
2003
Industrial fans - Speci
fi
cations for balance quality and vibration levels
DIN EN 1127-1
2019
Explosive atmospheres - Explosion prevention and protection -
Part 1: Basic concepts and methodology
DIN EN ISO 80079-36
2016
Explosive
atmospheres
Part 36: Non-electrical equipment for use in potentially explosive atmospheres -
Basic
concepts
and
requirements
DIN EN ISO 80079-37
2016
Explosive
atmospheres
Part 37: Non-electrical equipment for use in potentially explosive atmospheres -
Protection
by
constructional
safety
“c”
DIN EN 14986
2017
Design of fans working in potentially explosive atmospheres
DIN EN 60079-0
2014
Electrical apparatus for potentially explosive atmospheres
Part 0: Equipment - General requirements
DIN EN 60079-1
2015
Electrical apparatus for potentially explosive atmospheres
Part
1:
Equipment
protection
by
fl
ame-proof enclosures ‘d’
DIN EN 60079-7
2016
Explosive
atmospheres
Part 7: Equipment protection by increased safety “e”
As manufacturer, Elektror airsystems undertakes to forward the special technical documentation in respect of the partially completed
machine to national authorities at their request. The special technical documentation in respect of this partially completed machine
according to Appendix VII Part B has been created and is lodged with the “noti
fi
ed body” EU No. 0637.
Person responsible for the documentation: Mr. Kevin Kargar, Tel. +49 711 31973-1179.
Kreher (Managing Director)
Ost
fi
ldern, 17.01.2020
II 2G Ex h IIB T4 Gb
II 2G Ex h IIB T4 Gb
II 3D Ex h IIIC T135°C Dc
/
II 3D Ex h IIIC T135°C Dc
