Programming
EN-31
PROGRAMME
PROG 2/OFFSET (e.g. shutters are lowered to ventilation
position in the evening)
O K
O K
O K
PROGRAMME
PROG 2
OFFSET
OFFSET
min
▼
PROGRAMM
OK
OK
OK
OK
+/–
1. Press the MENU button.
2. To select the PROGAMME menu, press the
+ button until PROGAMME appears.
3. Confirm by pressing OK.
4. Press the + button until PROG 2 appears.
5. Confirm by pressing OK.
6. Press the + button until the OFFSET menu appears.
7. Confirm by pressing OK.
8. You can set the time for the down control command to be
triggered separately using the +/- button (max. +/- 240 mins,
depending on PROG 1 SWITCHING TIME
▼
).
Confirm your entry by pressing OK.
9. Press the MENU button to switch to operating mode.
Note: Using the SETTING menu level, you must enter the swit-
ching time of the intermediate position and select PROG 2
VENTILATION for the position of the end limits.
EN
AstroTec-868_AstroTec-868_bidi EN_0412.indd 31
stroTec-868_AstroTec-868_bidi EN_0412.indd 31
12.04.2012 17:31:15
12.04.2012 17:31:15
