General declaration of conformity:
The company elero GmbH hereby declares that the
AstroTec-868 is in conformity with the basic requirements and
other relevant provisions of the Directive 1999/5/EC.
EN-42
Troubleshooting/
General declaration of conformity
Troubleshooting
Problem
Cause
Remedy
The sun and twilight No light sensor is
Check the light sensor,
parameters cannot be connected or the light connecting cable and
changed and/or are sensor and/or the
connector plug.
not displayed.
connecting cable
is faulty.
Roller shutter does
No end limit position is Set the end limit
not move to the end set.
position using the
limit.
setting menu
PROG1/2.
Transmission control Batteries are low.
Replace batteries.
light is flashing.
Transmitter doesn’t Power supply was
Press RESET button.
respond following
interrupted for
Check settings.
battery replacement. too long.
AstroTec-868_AstroTec-868_bidi EN_0412.indd 42
stroTec-868_AstroTec-868_bidi EN_0412.indd 42
12.04.2012 17:31:18
12.04.2012 17:31:18