elero AstroTec-868 bidi, Operating Instructions Manual

Programming

SETTING 

INTERMEDIATE POSITION, VENTILATION/REVERSE, PROG 1 
END LIMIT  (Time/position programming)

See

previous page

INTERMEDIATE

POSITITION

VENTILATION

(REVERSE)

PROG 1

END LIMIT

OK

PROG 1

INTERMEDIATE

POSITION

PROG 1

VENTILATION

see

next page

OK

OK

+/–

+/–

+/–

+/–

OK

OK

   You have confirmed the 
  HOLIDAY/LIGHT SENSOR menu levels.
  INTERMEDIATE POSITION will appear.
1.  You can set the switching time to move to the INTERMEDIATE 

POSITION using the +/- button. The switching time is indicated in a few 
seconds or you can move to the INTERMEDIATE POSITION from the 
upper end limit using the UP/DOWN button.

2. Confirm by pressing OK.
3.   You can set the switching time to move to VENTILATION/REVERSE  

using the +/- button. The switching time is indicated in a few seconds or 
you can move to the VENTILATION/REVERSE from the lower end limit 
using the UP/DOWN button.

4. Confirm by pressing OK. PROG 1 END LIMIT appears.
5.  You can select PROG 1 END LIMIT, PROG 1 INTERMEDIATE 

 POSITION and PROG 1 VENTILATION/REVERSE using the +/-  button.

6. Confirm your selection by pressing OK.

The function PROG 1 END LIMIT has now been set.  

    Please read on for further programming options using the 

SETTING menu.

Warnhinweise

Programming

SETTING 

PROG 2 END LIMIT (Time/ position programming)

See

previous page

see

next page

PROG 2

END LIMIT

PROG 2

INTERMEDIATE

POSITION

PROG 2

VENTILATION

OK

OK

OK

+/–

+/–

Note:    This dialog window will only be displayed if a time is set in 

PROG2. 

  You have confirmed the PROG 1 END LIMIT menu level. 
  PROG 2 END LIMIT will appear.
1.   You can select PROG 2 END LIMIT, PROG 2 INTERMEDIATE  

 POSITION and PROG 2 VENTILATION/REVERSE using the 
+/-  button.

2.  Confirm your selection by pressing OK.

The function PROG 2 POSITION has now been set.  

   Please read on for further programming options using the 

 SETTING menu.

36 | EN 

EN | 37