Explanation of functions
16 | EN
Warnhinweise
Explanation of functions
EN | 17
INTERMEDIATE POSITION
The intermediate position is a position of the roller shutter/blind
between the upper and lower limits that can be freely selected.
This position can also be reached from the upper position after
programming.
Press the DOWN button twice in rapid succession to move to the
intermediate position.
When the system is in venetian blind mode, it is also possible to
programme a reverse position. In this case, this command will be
automatically executed following the intermediate position command.
VENTILATION/REVERSE
The ventilation/reverse position is a position of the roller shutter/
blind between the upper and lower limits that can be freely selected.
Using this function, you can raise the shutter from the lower end
limit until the ventilation slits are open. The slats of the blind will be
turned.
Press the UP button twice in rapid succession to move to the ventila-
tion/reverse position.
PROG 1/PROG 2
PROG 1 END LIMIT / PROG 2 END LIMIT
With the setting PROG 1 END LIMIT/PROG 2, the drive moves into
the lower limit position according to an automatic control command
▼
executed via the menu level PROG 1/PROG 2 END LIMIT.
INTERMEDIATE POSITION
With the setting PROG 1/PROG 2 INTERMEDIATE POSITION, the
drive moves into the pre-set intermediate position according to an
automatic control command
▼
.
VENTILATION/REVERSE
With the setting PROG 1/PROG 2 VENTILATION/REVERSE
POSITION, the drive first moves into the lower limit position and
then into the ventilation/reverse position according to an automatic
control command
▼
.
Language (ENGLISH EN)
You can select your national language.
ASTRO SHIFT
With the astro shift setting, the astro time
▲
and astro time
▼
can
be shifted independently of one another (max. +/- 120 minutes).
City (LONDON when the language is set to ENGLISH EN)
This allows you to precisely adapt the astro function to your location.
It is important to select a city for the astro function. Select the city
nearest to where you are located.
LONGITUDE/LATITUDE/TIME ZONE (only when EXPERT MODE
is ON)
You can find out your coordinates, for example, with the aid of an
atlas.
SUMMER/WINTER
SUMMER/WINTER describes the automatic clock adjustment for
daylight saving changes. If the default setting is ON, the
AstroTec-868/-868 bidi adjusts itself automatically.
09:00 Time
07:00 Time
05:00 Time
Close
19:00 Time
22:00 Time
16:00 Time
Sunset
Sunrise
Astro-
offset
Open, e.g. 1 hour after sunrise with + 1h Astro offset
Winter time
Summer time
Summer time
Winter time
Winter time
Summer time
Summer time
Winter time
Dec.
Jan.
Feb.
Mar.
Apr.
Jun
May
Jul.
Aug.
Sept.
Oct.
Nov.
Dec.
Summary of Contents for AstroTec-868 bidi
Page 24: ...46 EN EN 47...
