USA-27
USA-28
US
A
Programming
PROGRAMME
PROG 2/OFFSET
(e.g. shutters are lowered to ventilation position in
the evening)
O K
O K
O K
PROGRAMME
PROG 2
OFFSET
OFFSET
min
b
PROGRAMM
OK
OK
OK
OK
+/–
1. Press the
MENU
button.
2. To select the PROGAMME menu, press the
+
button until PROGAMME appears.
3. Confirm by pressing
OK
.
4. Press the
+
button until PROG2 appears.
5. Confirm by pressing
OK
.
6. Press the
+
button until the OFFSET menu appears.
7. Confirm by pressing
OK
.
8. You can set the time for the DOWN control command to be
triggered separately using the
+/-
button (max. +/- 240 mins,
depending on PROG1 SWITCHING TIME
b
).
Confirm your entry by pressing
OK
.
9. Press the
MENU
button to switch to operating mode.
Note:
Using the SETTING menu level, you must enter the switching
time of the intermediate position and select PROG2
VENTILATION for the position of the end limits.
Programming
8. Now select the PROG2 INDIVIDUAL function you require using
the
+/-
buttons:
INDIVIDUAL BLOCK
Press
+/-
for the BLOCK menu level (BLOCK 1 (1-5),
BLOCK 2 (6,7)). All further entries now refer to BLOCK 1 (1-5) and
BLOCK 2 (6,7).
Confirm by pressing
OK
.
INDIVIDUAL INDIVIDUAL
Press
+/-
for the INDIVIDUAL menu level (1,2,3,4,5,6,7).
All further entries now refer to every individual day of the week.
Confirm by pressing
OK
.
INDIVIDUELL WOCHE
Press
+/-
for the WEEK menu level (1-7). All further entries now
refer to every day of the week.
Confirm by pressing
OK
.
9. Now set the SWITCHING TIME
v
and the SWITCHING TIME
b
using the
+/-
buttons.
Confirm your entry by pressing
OK
.
10. Press the
MENU
button to switch to operating mode.
