www.elero.com
GB-25
unidirectional radio operation the status display lights up for 6
seconds: first green briefly twice and then red.
The channel in the transmitter is also deleted.
Deleting all the transmitters in the receiver
1. Press both the
STOP
button and the programming button
P
(on
the back of the device) + the
UP
the
DOWN
button.
2. Hold down this button combination for approx. 6 seconds.
The status display lights up orange-green briefly twice, followed
by red.
The channel in the transmitter is also deleted.
In unidirectional radio operation the status display lights up for 6
seconds: first green briefly twice and then red.
Battery replacement
NOTE
Replace batteries only with batteries of the
identical type.
1. Unscrew the underside of the device and
open the housing.
2. Remove the batteries.
3. Insert the new batteries in the correct
position.
4. Put the device back together again.
Dispose of used batteries properly.
Cleaning
Clean the device with a damp cloth. Do not use a detergent. This
may attack the plastic.
Disposal
Dispose of the device in accordance with the applicable regulations.