16
EN
DD51-E
Direct drive electronic position indicators
Models all rights reserved in accordance with the law.
Always mention the source when reproducing our drawings.
1. Safety Instructions
The product has been designed and manufactured in
accordance with the current regulations.
The product leaves the factory ready for use and complies
with the safety standards.
To maintain the product in this state, it is necessary that it is
assembled and used properly, in the closest compliance
with this instruction manual and with the following specific
safety precautions.
Ensure that the user has read and understood the
instruction manual and in particular the chapter “Safety
Instructions”.
In addition to the instruction manual, all the rules of law
must be observed, in regard to accident prevention and
environmental protection.
This manual is intended as an indispensable supplement
to the existing documentation (catalogues, data sheets
and assembly instructions).
The use without complying with the
descriptions / specific parameters, in
combination with systems / machines /
processes to be controlled, it can lead
to a malfunction of the product, causing:
- health hazards,
- environmental hazards,
- damage to the product and its proper functionality.
Do not open nor modify the case of the indicator.
Tampering with this product may endanger the
correctness and accuracy of its operation.
In case of malfunction, do not attempt any repairs to the
units and contact Elesa sales office.
