26
EN
DD52R-E-RF
Electronic position indicators
Data transmission via radio frequency
Models all rights reserved in accordance with the law.
Always mention the source when reproducing our drawings.
The available parameters and their descriptions are listed in the following table.
Parameter
Description
Available options
Standard
value
dir
Rotation
direction
--o
clockwise
o--
counterclockwise
--o
OriGin
Absolute
reference
value
-99999
;
99999
The parameter value depends
on the unit of measure selected.
0
OFFSET
Compensation
values
(Offset)
-99999
;
99999
The system allows you
to store up to 10 compensation
values:
OFS 0
...
OFS 9
The parameter value depends
on the unit of measure selected.
0
StEP
Reading
after one revolution
0.01
;
100.00
001.00
rES
Resolution
mm:
1
;
0.1
;
0.01
inches:
0.001
;
0.01
;
0.1
;
1
degrees:
0.01
;
0.1
;
1
mm:
0.1
inches:
0.01
degrees:
1
diSPL
Display orientation
0°
: display right
180°
: display reverse
0°
SPEEd
Reading max speed
[rpm]
300
;
600
;
1000
600
rAdio
Parameters to be
networked to the
UC-RF control unit
via radio frequency.
nEt id: id0...id9
nEt ch: ch01...ch36
id0
ch01
P_toll
Tolerance of target
position
0.01
;
9.99
The parameter value depends
on the unit of measure selected.
0.05
_ _ _ _ _ 0
Key function
ALL
: selectable units of
measure: mm, inch, D
nodEG
: selectable units of
measure: mm, inch
OFF
: the key does not allow the
unit of measure conversion
ALL
