HOW TO USE
1.
Set start and end spray time
Push MODE button. When
‘START’ appears on the LCD screen, push HOUR and
MIN buttons to set daily starting time;
Push MODE button again, when
‘STOP’ appears on LCD screen, push HOUR and
MIN buttons to set stopping time.
2.
Set spray time interval
Push MODE button. When
‘INTERVAL’ appears, push MIN button to set spray
interval time (every 1 to 60 minutes).
3.
Check spraying times and reset
Push MODE button. When
‘SPRAY’ appears on the LCD screen, you will also see the
total spray times. Refill can estimate to spray approximately 3000 times.
4. Set certain day working
Push MODE button. When
‘WEEK’ appears on the LCD screen, push the WEEK
button to set certain date working mode. For example:
1.2.3.4.5 (Spray Monday to Friday only)
1.2.3.4.5.6 (Spray Monday to Saturday only)
1.2.3.4.5.6.7 (Spray Monday to Sunday only)
5. Set time and week:
Push the MODE button. When CLOCK appears in the LCD screen, push HOUR and
MIN buttons to set the current time. Push the WEEK button to set the current day of
the week.
DISPENSER INSTALLATION
1.
Install the Dispenser above 2m height to avoid sprays towards people.
2. Install the Dispenser on the wall with the screws and plugs provided.
SPRAY CAN/REFILL CAN INSTALLTION:
1. Insert the refill can into the groove as below:
