Package Contents
(1) Audio player
(1) Software CD
(1) Ethernet cable
(2) Audio cables
(1) Power adaptor
(1) This user guide
Hardware Descriptions
Specifications
Memory Capacity: 1 GB
Max. Number of Sound Files: 1
Sound File Format: MP3, CBR/VBR up to 320 kbps, sample rate up to 44.1 KHz
* Stereo files are played in mono with both channels mixed together.
Ethernet Interface: RJ-45, 10/100 Mbps
* Static IP address is required for the player.
Audio Outputs:
- 8 Ohm single ended with 1/8” phone jack (for most applications)
- 600 Ohm balanced with RJ-11 jack
* Both outputs provide the same audio content.
Indicator Lights
System:
This light flashes slowly during normal operation.
Play:
This light is normally on but turned off during file transfer.
LAN:
This light is on if the LAN connection is good, and flashes during network
activities such as file transfer.
Volume Control
There are two levels of volume control: hardware and software. The hardware
control (via the volume dial on the player) sets the maximum output level. The
software control (via the server program) allows you to remotely adjust the volume
within the range set by the hardware control.
Hardware Reset Button
To reset the hardware configurations (such as IP address and passwords) to the
factory default, hold this button down for 5 seconds while the player powers up. If
you should somehow forget the passwords, use this button to reset the passwords
to blank (no password) so that you can access the player again. Remember to re-
configure the player afterwards because all the settings will be put back to the
factory default.
- 2 -
