The Accounts Command
Add Accounts
In the Contact area, all fields are optional except the Account Name which must be
unique. In the eHold Player area, fill in the IP Address but leave the IO Port and the
Digital IO Port fields unchanged.
The player has no default password. If you want to set up the password (recom-
mended), click the “Config” button after filling out the IP Address. When the Con-
troller Status web page opens, click the “Login” button. There are two passwords in
the next page. The Setup password is what you use to log in this page - the default
is blank and that’s why you were able to log in without the password previously.
The Access password is what the server program uses to access the player (the
Password in the eHold Player area.) If someday you lose the passwords, you may
reset the player to the default (blank for both passwords) by pressing down the
player’s hardware reset button for 5 seconds while turning on the power.
The Reset button, not to be confused with the hardware reset button, issues a reset
command to the player. Normally the player does not need to be reset. An aborted
transfer or loss of network connectivity during a transfer may put the player in a
state requiring a reset to restore normal operation. Recycling the player’s power
will also achieve the goal.
- 7 -
