13
Error no. 20
MOSFET gate 1 and 2 problem (contact
service)
Error no. 21
Safety resistor corrupted
Error no. 22
Battery voltage below 9V
Error no. 23
Sparks at High Voltage output (check anode
and cathode connectors)
Error no. 24
Inside relay 12V is off
Error no. 25
Battery voltage between 5V and 6V (probably
wrong type of battery)
Error no. 26
Thyristor conduct current
Error no. 27
Non symmetrical MOSFET 1 behaviour
Error no. 28
Non symmetrical MOSFET 2 behaviour
Error no. 29
Processor supply voltage above 5V
Error no. 30
Probably battery charger is connected. It can
corrupt electrofisher.
Error no. 31
Safety resistor corrupted.
Error no. 32
Weak battery. High start current.
Error no. 33
Safety resistor have short circuit – probably
water inside electrofisher
LCD Backlight switch OFF
Display in standard is illuminated. If you want to disable the
backlight, press and hold the START button during connection of
battery. By this you can fish in total darkness. If you want to return
the display backlight disconnect the battery and reconnect it.
LANGUAGE CHANGE
Message language can be easily change.
For ENGLISH
During connecting of battery - POWER REGULATION should
be set at 0% level.
