02/02/22
User Manual HPS/T 62000590_07_
21
3.5.2.
Output type
There is only the three-phase output.
The output power is variable to type of the load, for resistive load the power is nominal power, for
inductor load is greater than the nominal power, for capacitor load is less than the nominal power.
3.5.3.
Continuous or INRUSH mode
Using the "Inrush" switch you can select the operation of the machine, in particular you can
change the current limits as shown in the tables.
When the LED on the switch INRUSH is lit, the machine is on Inrush mode and the HPS/T can gives
three times the rated current.
When the LED on the switch INRUSH is off, the output continuously current is higher.
This button is disabled if the machine has not the INRUSH capabilities.
3.6.
ALARMS
