10/02/22
User Manual HPS/P/20kVA 6200591_01_
19
2.9.2.
CHANGE CONFIGURATION MASTER AND SLAVE
Down the steps you have to do to change the configuration of the system
1. Set 0 on the output voltage of the machines that you need to change the configuration.
2. Disable the lines.
3. Turn off the machines that you need to change the configuration, with the contacts 1.7 and 1.8.
4. Set the configuration Master and Slave with the commands 1.1 and 1.2.
5. Turn on the machine with the commands (1.7 and 1.8)
6. Set the mode of the machines (remote, range, sensing), You have to set only the master
machine.
7. Enable the lines.
8. The system is ready.
2.9.3.
TURN OFF
Down the steps you have to do to turn off the system the system
1. Set 0 on the output voltage of the machine.
2. Disable the lines.
3. Turn off the machines, with the command 1.7 and 1.8.
