10/02/22
User Manual HPS/P/20kVA 6200591_01_
11
sia la frequenza impostata, inoltre é possibile la lettura della tensione di uscita con una precisione
dello 0.3%.
L'utente viene inoltre avvertito nel caso di superamento della corrente massima fornibile
dall’HPS, oppure nel caso d
i caduta elevata nei collegamenti, che non deve superare il 10% della
tensione impostata. Si ricorda che nel caso di superamento d
ella corrente massima ammessa l’HPS
limita automaticamente questa senza alcun danno per la macchina; l'unica conseguenza e' che
non viene più garantita ne' la precisione della forma d'onda in uscita ne' la precisione del valore di
tensione in uscita.
L'utente può sia impostare la tensione di uscita tramite tastiera numerica sia variarla conti-
nuamente tramite appositi tasti; analoga possibilità vi e' anche per impostare la frequenza.
Questa possibilità rende molto flessibile l
’HPS
alle diverse applicazioni dove sia richiesta una va-
riazione continua delle due grandezze di regolazione attorno a un dato valore.
1.1.4.
Prestazioni generali
Tutte le caratteristiche seguenti sono valide entro il regime di normale funzionamento
(1)
Con carichi lineari.
f.s. = Fondo Scala
s.v. = Valore impostato
1.1.5.
Specifiche generali
PARAMETRO
VALORE
Range frequenza di uscita
(1) (2)
50Hz - 80Hz
Range di sincronizzazione
45Hz-65Hz
Risoluzione di fase
0.088°(12 bit su 360°)
Risoluzione di frequenza
0.02Hz
Precisione e stabilità nel tempo della frequenza
100ppm
Ten
sione d’uscita
300V, 150V
Risoluzione tensione di uscita
0.025% f.s. (12 bit su f.s.)
Temperatura di funzionamento
0°C - 35°C
(1)
La frequenza di uscita può essere aumentata fino a 320Hz a prestazioni ridotte.
(2)
S
otto i 50Hz c’è un derating della te
nsione massima
PARAMETER
VALUE
Distorsione della forma d'onda di uscita
(1)
<0.6%
Stabilità della corrente di uscita
<0.1% f.s.
Precisione della tensione di uscita
<0.5% f.s.
Recuper
o della forma d’onda d’uscita
<200us
Massima tensione compensabile
10% s.v.
Tempo di recupero della RMS della di uscita
<200ms