10/02/22
User Manual HPS/P/20kVA 6200591_01_
5
Elettrotest Spa
P,zza R.Riello 20/B
45021 Badia Polesine (RO)
Italy
+39 042553567
After sale support
Thank you for purchasing the HPS generator.
HPS is a high-performance variable voltage generator (amplitude and frequency) in order to
simulate and electrical line for test for different application (laboratory, test line, production line)
Responsability:
Elettrotest disclaims any responsibility for damage to people or things
caused by an improper use of its products.
Mandatory
-
Verify voltage, power and frequency compatibility between HPS range and electrical
specification of equipment under test (EUT).
-
Electrical components of the system must be suitable for the rated voltage and current of
HPS model (paragraph 1.2)
-
The electrical components, which by construction cannot support external influences (of
the generator in all its range), can only be used on condition that adequate additional
protection has been provided with automatic disconnection protection.
Notes:
This manual lists precautions and information about operating procedure of device.
The content of this manual is subject to change without prior notice because of continuing
im
provements on the instrument’s
Should you have any questions or find any error please contact us by email.
Copying or reproducing all or any part of the contents of this document is strictly
prohibited, without Elettrotest permission
Version:
This manual is written for
HPS/P/200kVA firmware version TPSX 09_
and higher
To consult older manual versions, please contact our support at
