GSM Gateway Proline Digital
User Manual
Picture
3
Picture
4
3.3 Connection of power supply
If you are sure that SIM card is inserted, the antenna is switch and the phone
line is connected to the device you can connect power supply.
We strongly recommend you to use the adapter which is included in the set. If
you use adapters different from this in the set the manufacturer are not responsible
for damage caused by using other power supply.
3.4 Start the device
If you done all steps described in 3.2 and 3.3, the device will start working.
Initially the red led will light constantly and when it connect with GSM network it
will start flashing. The device is now ready for use.
Pick up the handset and hear if it has signal “dial”. To dial a number your
phone connected to the device must be in tone mode.
Most common reasons for failure to start the unit:
•
You forgot to insert SIM card in the unit
•
You forgot to disable the PIN code of the SIM card
•
The antenna is put in place with bad coverage of GSM network
•
your power supply does not meets the requirements
If launching the device fails for any reason not mentioned above please contact
the technical staff for more information and assistance.
8