44
4.6 FUNCTIONAL INDICATOR LIGHT
Functional indicator light is active when the mode knob is set to any function and
switches off when set to the starting position “0”.
4.7 TABLE OF FUNCTIONS
ATTENTION!
ALL FUNCTIONS ARE SWITCHED ON AFTER
ADJUSTING THE “TEMPERATURE SETTING” MODE
TO THE REQUIRED LEVEL. THE ORDER OF THE
OPERATING MODES LISTED IN THE TABLE MAY
DIFFER FROM THE ORDER IN WHICH THEY ARE
LOCATED AT YOUR PRODUCT.
MODE
TEMPERATURE
NAME AND DESCRIPTION OF THE FUNCTION
«O»
NO HEATING
The oven is set to non-operating mode. To switch off the
oven, set all knobs to this starting position.
50-200 °С
Defrosting:
Only the turbo fan is activated. This function is intended for
defrosting by creating around the frozen food room
temperature with preservation of food quality, as well as for
cooling hot dishes.
50-200 °С
Bottom heater:
Only bottom heat is on. This function is intended for dishes
which are required to be baked from the bottom, heating
food, dishes, which are cooked in clay pots at low
temperatures within long time periods, as well as food, which
shall be brown at the bottom.
50-200 °С
Top heater:
Only top heat is on. This function is intended for heating
previously cooked meals, as well as food, which shall be
brown at the top.
50-200 °С
Top and bottom heaters:
Top and bottom heaters are on simultaneously. This function
is aimed for cooking muffins, pies, which are baked in
moulds, food, dishes cooked in clay pots. It is recommended
to cook only on baking tray.
