3.2
Replacing address tag
Fitter can place its own address tag in the panel address field.
To do that, loosen the locking bolt in the
back part of the panel plastic cover in hole identified BS (glass lock, illustration 4). Then, depressing left part
of the address field glass, slide the glass to left in order to remove it (illustration 5). Place own tag in a foil
protection under the address window glass (illustration 6). Having placed the whole element in the address
field, remember to screw the locking bolt.
2
Applies to version Optima 255V2
12
Figure 4: Locking screw
Figure 5: Address window glass demounting
Figure 6: Address tag placement