5.1.5
Relay test
The panel activates the relay.
Operation of additional relay (NO and CON outputs), can be checked using a test, without codes. To start
the test:
§
Enter the menu
Settings
(
code )
§
Select
Service programs
(confirm with „ ”)
§
Select
Relay test
(confirm with „ ”)
After this operation, electric lock operates for maximum 30 s. Operation of the relay is always signalled with
the message <<ACTIVE>>. Test can be interrupted pressing „#”. After completion of the test, the menu
remains open.
5.1.6
Access control
Service code
allows changing the fitter code (8 digits), after previous entering current code,
Administrator (fitter) service code is provided by the manufacturer. To increase the safety and comfort of
administrator, it is recommended to change the code after initial start-up. To change the service code:
§
Enter the menu
Settings
(
code )
§
Select
Service programs
(confirm with „ ”)
§
Select
Access control
(confirm with „
” )
§
Select
Service code
(confirm with „
” )
then:
§
Enter the code confirm with „
”,
§
Enter new code and confirm with „
” (new code must have eight digits).
§
Confirm new code by re-entering it and confirm with „
” ,
§
When "SAVE?" message appears, confirm with „
” ,
!
Factory service code always starts with four digit prefix 1131. To provide compatibility, it is
recommended that the new code maintains the prefix.
Service RFID tags
allows editing (adding and deleting) fitter tags,
The service RFID tag allows editing the settings (allows entering the full menu
Settings –
see clause 5)
without using the administrator code (RFID tag becomes additional code). Service tags can be added or
deleted. Number of service RFID tags is max. 8.
To add the service tag:
§
Enter the menu
Settings
(
code )
§
Select
Service programs
(confirm with „ ”)
§
Select
Access control
(confirm with „
” )
§
Select
Service RF tags
(confirm with „
” )
§
Using arrows (keys "0", "8"), select tag number,
§
Approach new tag near the reader module until message "ADD as X TAG" appears, where X stands
for tag number,
§
Confirm with „ ” , or cancel with „#”
10
Applies to Optima 255RV2
24