user (if administrator allows that) may extend the time to the upper limit value, i.e. the dialling time. To
change the time:
§
Enter the menu
Settings
(
code )
§
Select
General settings
(confirm with „
” )
§
Select
Talking settings
(confirm with „
” )
§
Select
Ringing time
(confirm with „
” )
§
Screen informing about current setting appears (NOW= X, where X is a number within 0 to dialling
time and means the maximum ringing time in seconds) to change, press „
”
§
Message appears „SWITCH TO”, in order to enter time in seconds (time
within 0 – dialling time) and confirm with key „
” (cancel with „#”).
Default value is 15 seconds.
Picked up ringing time (picked up handset while ringing)
Picked up ringing time specifies the time during which the panel informs user about incorrectly put down
receiver and attempt to establish connection. After that the panel returns to standstill. This time can be set
within 1-99 s. Default set value is 15 s. To change the time:
§
Enter the menu
Settings
(
code )
§
Select
General settings
(confirm with „
” )
§
Select
Talking settings
(confirm with „
” )
§
Select
Picked up ringing time
(confirm with „
” )
§
Screen informing about current setting appears (NOW= X, where X is a number
within 1 to 99 and means the maximum picked up ringing time in seconds) to change, press „
”
§
Message appears „SWITCH TO”, in order to enter time in seconds (time
within 1 – 255 seconds) and confirm with key „
” (cancel with „#”).
Ringing time when the receiver is picked up is independent from the ring tone settings for a given handset.
During ringing, user may put down the receiver, the panel starts the putting down and automatically
initiates repeated dialling.
Redirect unused numbers
Unused numbers (all from outside the range) can be redirected to indicated numbers.
§
Enter the menu
Settings
(
code )
§
Select
General settings
(confirm with „
” )
§
Select
Talking settings
(confirm with „
” )
§
Select
Redirect unused
(confirm with „
” )
§
Screen informing about current setting appears (REDIRECT TO: XX, where XX is the number to which
the unused numbers are redirected), to change, press „
”,
§
Screen with the following message appears „ENTER NO”, enter the number and press
„ ” (cancel with „#”)
5.3.2
Electric lock settings
Electric lock buzz
Activation of this setting makes the panel to generate characteristic sound while opening the electric lock
(e.g. use this option when DC electric lock is connected). To change the settings:
§
Enter the menu
Settings
(
code )
§
Select
General settings
(confirm with „
” )
30
