with the panel will be established. The screen displays message "Talking". The connection can take max.
255 seconds (about 4 minutes)
, and can be terminated earlier by putting down the handset receiver.
4.4
Opening the electric lock
The electric lock can be opened:
§
after selecting user code on the entry panel - from the keyboard, select:
„ ” flat opening code + „
”, e.g. for flat Np 123, which code is 5678, select from the
keyboard: 1235678 , for flat No 3 with the assigned code 9876, this will be:
39876 ,
§
having approached the RFID tag in proper place on the entry panel – having approached the
wireless tag, electric lock automatically opens for a set, programmable period of time
§
having selected a general code on the entry panel - entered code alone, without flat code,
e.g. for code 1234 select
1234 ,
§
during the talking from the handset, after selecting door opening button. If the connection of the
panel with handset is not established, it is not possible to open the electric lock with the handset
opening button,
§
using additional button connected to KE input
Similarly, it is possible to activate additional relay if suitable settings allow that (see 5.3.3). It is only different
with the method of starting the relay with the codes. Knowing the individual code, to activate the relay:
§
after selecting user code on the entry panel - from the keyboard, select:
„
” flat opening code + „
”, e.g. for flat Np 43, which code is 8541, select from the
keyboard:
438541 , for flat No 7 with the assigned code 6435, this will be:
76435 ,
Knowing the general code, to start the relay:
§
having selected a general code on the entry panel - entered code alone, without flat code, e.g. for
code 7523 select
7523 ,
6
See General settings / Talking options / Talking time
7
Applies to Optima 255RV2
15
