32
•
on certain date (year [YYYY], month [MM], day [DD] and time [hh:mm] must be
specified);
•
on certain day in a year (month [MM], day [DD] and time [hh:mm] must be specified);
•
on certain day every month (day [DD] and time [hh:mm] must be specified);
•
on certain day every week (weekday [WD] and time [hh:mm] must be specified);
•
on daylight saving changes (start or end of daylight saving must be chosen);
•
on every day (time [hh:mm] must be specified).
Table 8-1 Billing period reset examples
Case
Period No.
Every decade:
A case „
on certain day
every month (day [DD] and
time [hh:mm] must be
specified)
“ is chosen
5 times in year, on
certain dates
A case „
on certain day in a
year (month [MM], day [DD]
and time [hh:mm] must be
specified)
“ is chosen
2 times in week,
every week
A case „
on certain day
every week (weekday
[WD] and time [hh:mm]
must be specified)
“ is
chosen
Every day at different
times
A case „
• on every day
(time [hh:mm] must be
specified)
“ is chosen
1
YYYY-MM-01 00:00,
YYYY-01-01 01:00
Friday 00:00
Every day 00:00
2
YYYY-MM-11 00:00,
YYYY-03-01 01:00
Sunday 00:00
Every day 03:00
3
YYYY-MM-21 00:00
.
YYYY-05-01 01:00
-
Every day 09:00
4
-
YYYY-07-01 01:00
-
Every day 12:00
5
-
YYYY-09-01 01:00
-
Every day 18:00
6
-
-
-
Every day 23:00
Energy and maximum demand values of up to 16 last billing periods are stored in billing
profile. Up to 16 newest values (depends on parameterization) may be reviewed in meter’s
LCD. All data stored in billing profile may be downloaded to computer via communication
interfaces. Values of billing profile are identified by OBIS code in meter LCD:
Table 8-2 Billing profile data list
F.F
Fatal error
↓↓↓
0.0.0
Serial number
Billing period energy
0.0.1
User ID
1.9.T*VV
+A
0.0.2
Location ID
2.9.T*VV
-A
C.1.0
Serial number
15.9.T*VV
|A|
0.9.1
Time
3.9.T*VV
+R
0.9.2
Date
4.9.T*VV
-R
Maximum demand
5.9.T*VV
R1
1.2.M*VV
+P
6.9.T*VV
R2
1.6.M*VV
+P
7.9.T*VV
R3
2.2.M*VV
-P
8.9.T*VV
R4
2.6.M*VV
-P
0.1.0
Billing period counter
15.2.M*VV |P|
0.1.1
Number of available billing periods
15.6.M*VV |P|
0.1.2*VV
Time stamp of the billing period
3.2.M*VV
+Q
•
Demand tariff number M=[0T6], “0” - max. demand off all
the tariff zones
•
Energy tariff number T=[0T6], where “0” denotes the sum of
all tariffs
•
“VV” – is value billing period counter, it may obtain value
from 00 to 99. Every time billing period is reset, certain
energy and maximum demand values are stored in billing
profile and the billing period counter is incremented by one.
When “VV” reaches the highest value, the numbering starts
over again from “00”. However only energy and maximum
demand values of 16 last billing periods may be stored in
billing profile, so only 16 “VV” of certain data will be visible in
billing profile data list.
3.6.M*VV
+Q
4.2.M*VV
-Q
4.6.M*VV
-Q
5.6.M
Q1
6.6.M
Q2
7.6.M
Q3
8.6.M
Q4
Total energy
1.8.T*VV
+A
2.8.T*VV
-A
15.8.T*VV
|A|
3.8.T*VV
+R
4.8.T*VV
-R
5.8.T*VV
R1
6.8.T*VV
R2
7.8.T*VV
R3
8.8.T*VV
R4
Summary of Contents for G1B Series
Page 2: ......
