SECTION 2
2.1
2.2
POWER-ON AND RESET CONDITIONS
The following sections define the factory and reset power-on conditions of the unit.
Factory
Defaults
When the CW-P unit is first powered up, the following factory defaults will be in place:
•
GPIB Address:
25
•
RS-232 Baud Rate:
9600
•
RS-232 Data Bits:
8
•
RS-232 Stop Bits:
1
•
RS-232 Parity:
N
Power-On
Conditions
When the CW-P unit is first powered up, the system reads in the configuration that was
last saved to memory position 0. The specific system items in Save and Recall are:
•
VoltsA, VoltsB, VoltsC (B and C for multi-unit configuration)
•
Voltage Range, either High or Low
•
Current Protection Type, either Fold or Shut
•
Current Shutdown Time
•
Current LimitA, Current LimitB, Current LimitC (B and C for multi-unit configuration)
•
Frequency
•
Phase AngleAB
•
Phase AngleAC
•
External Input Assignment, either Analog In or Pulse Out.
Programming Manual
2-1
Summary of Contents for CW 1251P
Page 2: ......