background image

Hardware Reference Guide EyeTV 500

2

EyeTV 500 HDTV digital TV recorder

 

for free over-to-air (ATSC)  
and digital cable (Clear QAM)  
television

This hardware reference guide describes the particulars of your EyeTV hard-
ware.

EyeTV 500  System Requirements

EyeTV 500  requires the following minimum system configuration:

•  Macintosh computer with minimum PowerPC® G4 500Mhz or 

G5 processor. Dual G5 processor required for HDTV playback 
at full frame rate at full 1080i resolution

•  A built-in FireWire port or independently powered FireWire 

hub

•  Mac OS X 10.3 or later (Mac OS X v10.3.7 recommended), with 

256 MB RAM (512 MB recommended)

•  Minimum 20 MB free hard disk space
•  Approximately 8 GB of free hard disk space for each hour of 

video to be recorded

•  QuickTime 6.5
•  Off-the-air antenna (optimized for HDTV reception) for broad-

cast over-the-air TV reception (not included) or

•  Basic digital cable subscription from your local cable pro-

vider for broadcast digital cable TV reception (Clear QAM)

•  An Internet connection to use EyeTV’s Electronic Program 

Guide (EPG) (Optional)

•  A CD or DVD burner and Toast 6 Titanium CD recording soft-

ware to create Video CDs, Super Video CDs or DVDs  
(optional)

Summary of Contents for EyeTV 500











Reviews: