28
28
Device power-up delay
Maximum time the device will take before it properly reports itself to the host controller.
'Auto' uses default value: for a root port it is 100 ms, for a hub port the delay is taken
from hub descriptor.
2.4 Chipset
Figure 4-4 : BIOS Chipset Menu
System Agent (SA) Configuration
System
Agent (SA) Parameters.
PCH-IO Configuration
PCH
Parameters.
LVDS Configuration
LVDS
Configuration.
2.4.1 System Agent (SA) Configuration
Figure 4-4-1 : USB Settings
VT-d
VT-d capability.
GMM Device (B0:D8:F0)
Enable/disable
SA GMM Device.
Summary of Contents for LPC-P150S-2VEX
