30
6.10.
Machine maintenance table
Regular maintenance
Each time
After first 5
hours of
using
3 months
or 50
hours
6 months
or 100
hours
12
months
or 300
hours
Hydraulic oil
Check level
x
X
X(1)
X
Change
x
Engine oil
Check level
x
Change
x
x
Pins
Check
x
x
Screws and
rubber tracks
Check/
tighten
x
Lubrication
Perform
x(or 10h)
Electric
cables
Check
x
Change
Replace in case of holes in isolations or brokes
Hydraulic
hoses
Check
x
Change
Replace in case of leaks or braid is visible
X(1) Empty the tank, when the oil filter is not heavily soiled, you can use it again
Mini digger is filled up with hydraulic oil
AGIP ARNICA 46
.
To next fill up it is recommended the same oil or other with the same parameters:
ISO L-HV and DIN 51524 t.3 HVLP
Important:
For detailed information on fuel quality, lubrication instructions and servicing of the
power unit, refer to the Briggs&Stratton engine manual.
6.11.
Pressure throttling
Warning:
Throttling the pressure in the hydraulic system is set at the factory. Adjustment should
be made only in justified cases.
The pressure in the hydraulic system can be throttled by a throttle valve (at hydraulic distributor).
