background image

8

 

 

3.

 

SAFETY INSTRUCTIONS 

The  mini  diggers  user  duties  are    knowledge  of  and  compliance  with  applicable  laws,  therefore, 
included safety instructions are only recommendations. 
 

 

The operator must be healthy and be at least 18 years of age. 

 

Mini digger must be maintained in good condition. 

 

Inspection and repairs can be carried out only after the machine is turned off 

 

It  is  forbidden  to  make  unauthorized  modifications  to  the  machine  without  the 
manufacturer's consent 

 

It is forbidden to work the machine  in  explosive atmospheres and confined spaces without 
adequate ventilation 

 

Mini digger is not intended for public roads, it can only moves beyond them. 

 

It is forbidden to smoking and approaching other sources of ignition while refueling. 

 

The operator should exercise extreme caution when working, all people nearby mini digger 
should still be within his sight. 

 

Do not fill fuel other than what is recommended for the engine. Detailed recommendations 
are contained in the engine manual. 

 

Mini digger can be operated at the appropriate level of engine and hydraulic oil. 

 

Mini digger is designed to work in the daytime, in the case of work in conditions of limited 
visibility,  it  should  be  provided  appropriate  lighting  equipment  to  the  work  area  on  Your 
own. 

 

It is forbidden  to use the machine in clothing unsuitable for this or another that can cause 
danger (eg. long dangling pieces of clothing). 

 

It is forbidden to use the machine if the operator contamination with substances such as oil, 
grease, etc. that may cause a slip hazard. 

 

 

 

 

Warning: 

Before operating the machine, the operator of mini digger must have sufficient 
knowledge and read the instructions. 
Unqualified user can cause serious injury or even death. 

 

The contents of this chapter contains instructions and precautions that must be followed to ensure 
proper and safe operation and maintenance. 
These  rules  do  not  exempt  the  operator  from  the  obligation  to  comply  with  the  law  or  other 
applicable rules regarding safety and health. 
 

Users duties 

The user is obliged to pay attention to the specific requirements and hazards during work as well as 
personal safety. This is necessary to prevent serious injury or damage, and even deaths 
 

Responsibility for other 

It should work with the machine so as to avoid the risk of accidents and injuries. You have the right 
and obligation to prevent this. No one is allowed to enter the working area of the machine during its 
operation without prior notice to the operator. If someone must enter into the working area of the 
machine to perform a specific job, that person must exercise extreme caution and without the need 
not to move from the back of the machine or remain in a dangerous area

 

Summary of Contents for SpringerMAX



































Reviews: