20
Caution! Even if anti-condensation is never
enabled, always perform regular maintenance
of the drip tray as outlined in the section
"Maintenance - Cleaning - Maintenance of the
drip tray"..
Indicators of Filter Saturation
At regular time intervals, the hood signals the need to perform filter
maintenance.
Button
on with steady light: perform grease filter
maintenance.
Button
flashing: perform activated charcoal filter
maintenance.
Note: Filter saturation signal is visible within the first minute
after switching off the hood; within this time, the reset of
saturation indicators must be performed.
Reset of filter saturation indicators:
Press and hold the button
Activation of saturation indicator activated charcoal filter
Note: this operation must be performed with the hood off.
This indicator is normally deactivated; press and hold the
button
to activate the function: the button lights up
with steady light.
To deactivate the function, press and hold the button
: the button lights up flashing.
Maintenance
Cleaning
Clean using ONLY a cloth dampened with neutral liquid detergent.
DO NOT CLEAN WITH TOOLS OR INSTRUMENTS. Do not use
abrasive products. DO NOT USE ALCOHOL!
Maintenance of the condensation drip tray
The tray should be emptied and cleaned AT LEAST once a week
or more frequently depending on the use of the hood.
1. Place a container under the drain hole.
2. Press the tab down to open the drain and empty the
condensation.
Caution! Condensation residue may remain inside the tray after
emptying.
