22
cable is correctly assembled.
The hood is provided with a special power cable ; if the cable
is damaged, request a new one from Technical Service.
Mounting
Very heavy product; hood handling and installation must
be carried out by at least two persons.
Expansion wall plugs are provided to secure the hood to most
types of walls/ceilings. However, a qualified technician must
verify suitability of the materials in accordance with the type of
wall/ceiling. The wall/ceiling must be strong enough to take
the weight of the hood.
Do not tile, grout or silicone this appliance to the wall.
Surface mounting only.
An aesthetic flue can be purchased as an optional accessory.
Check with the assistance centre whether the model in your
possession envisages this possibility.
We advise installing the hood after having purchased the flue
to check with certainty the most suitable installation.
Operation
ON/OFF light button
Press to turn the cooktop light on or off.
In selected models only:
Intensity regulation: With the light on,
press and hold to adjust the light intensity.
Tone regulation: With the light on, press
and hold keys "
" and "
" to adjust
the light tone.
"BOOST" speed selection key
1st push
: to enable the intensive suction
speed “
BOOST 1
”, timed
for 30 minutes
this prolonged timing has been designed
to guarantee a suitable cooking time for
preparations that release high amounts of
smoke during cooking
Note :
after 30 minutes, the hood will
return to the suction speed previously set
2nd push
("BOOST 1" activated): to
activate the intensive suction speed
“
BOOST 2
”, timed
for 7 minutes
Note:
after 7 minutes, the hood will return
to the previously set suction speed
3rd push
("BOOST 2" activated): to exit
the function and return to the speed
previously set.
Note:
the speed key previously set
remains lit during BOOST operation.
Speed selection key 3
Push to activate the
high
speed (suction
power)
Speed selection key 2
Push to activate the
average
speed
(suction power)
Speed selection key 1
Push to enable the
low
speed (suction
power)
Power button
Push to switch on the hood and enable
speed selection;
if pushed while the motor is running, the
latter will stop
Note:
if no function is activated within 10
seconds, the hood turns off.
Filter Saturation indicator lights
The hood signals at regular intervals that the filters must be
serviced.
Keys
"
" and "
" lit and flashing very slowly:
service the grease filter.
Keys "
" and "
" lit and flashing quickly: service
the odour filter.
Note:
The filter saturation warning signal is visible within
the first 10 seconds after the hood is switched on.
Reset filter saturation indicator:
Press and hold the keys "
" and "
"
The keys will flash quickly to confirm that reset has been
completed
Activation of filter saturation indicators
Note:
this operation must be performed with the hood off.
- Grease filter
Push and hold down the keys "
" and "
" to
activate the function
the keys light up
flashing very slowly
, indicating that the
grease filter indicator can be activated
Note:
Push the keys " " and " " to activate or deactivate
- Odour filter
Push and hold down the keys "
" and "
" to
activate the function
the keys light up
flashing quickly
, indicating that the
odour filter indicator can be activated (normally deactivated)
Note:
Push the keys " " and " " to activate or deactivate
