ELICA Fusaro, Installation Instruction Manual

11

CLEANING 

IMPORTANT:

  Clean  the  hood  and  grease  filters  frequently 

according to the following instructions. Replace grease filter before 

operating the hood. Reinstall grease filter correctly and replace the 

screw in the vent system. 

Exterior Surfaces:

IMPORTANT: 

Do  not  use  soap-filled  scouring  pads,  abrasive 

cleaners, Cooktop Polishing Creme, steel wool, gritty washcloths

or paper towels. To avoid damage to the stainless steel, do not use 
cleaners that contain chlorine.

Cleaning Method:

Rub in direction of grain to avoid scratching or damaging the 

  surface.

For stainless steel models, use  a special stainless steel 

  cleaner and polish.

Liquid detergent or all-purpose cleaner: Rinse with clean water 

  and dry with soft, lint-free cloth. 
  Glass cleaner to remove fingerprints. 
 

Metal Grease Filter (ESN, EFS and ERS Series Models)
For ducted installations:

Remove screw from the grease filter retainer.
Turn the grease filter retainer to release filter.
Wash metal filters as needed in dishwasher or hot detergent 

  solution.

Reinstall the filter by placing the back edge in the channel at 

  rear of hood. Push filter into place, turn the filter retainer to 

  secure filter to range hood. 

■

■

■

1.
2.
3.

4.

RANGE HOOD CARE

A. On / Off light button
B. Blower Off and Speed minimum button
C. Blower speed medium button
D. Blower speed maximum button

ENM230 and ENM236 Series Models Control and features:

Operating the light

The On/Off light button controls both lights. Press once for On and again for Off.

Operating the blower

The BLOWER SPEED buttons turn the blower on and control the blower speed and 
sound level for quiet operation. The speed can be changed anytime during fan 
operation by pressing the desired blower speed button. Press the BLOWER OFF
button a second time to turn the blower off.

Replace screw in the grease filter retainer 

For non-ducted (recirculation) installations:

The charcoal filter is not washable. It should last up to 6 months

with normal use.

1. Replace metal grease filter with a charcoal filter. For

information on ordering, see the “Accessories” section.

To replace filter:

1. Remove screw from the grease filter retainer.

2. Turn the grease filter retainer to release filter.

3. Reinstall the filter by placing the back edge in the channel at

rear of hood. Push filter into place, turn the filter retainer to

secure filter to range hood.

4. Replace screw in the grease filter retainer. 

Metal Grease Filter (For ENM Series Models)
For ducted installations:

Press the grease filter retainer to release filter.
Wash metal filter as needed in dishwasher or hot detergent 

  solution.

Reinstall the filter by placing the back edge in the channel at 

  rear of hood. Push filter into place, push down the filter  

  retainer to secure filter to range hood. 

5.

1.
2.

3.

A

A. Filter retainer

A

B

C

A. Halogen lights
B. Grease filter retainer
C. Grease filter

A

B

C

D