ELICA Fusaro, Installation Instruction Manual

3

Tools and Parts

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.

Tools needed (all models)

Drill
1¹⁄

4

” (3.0 cm) drill bit

¹⁄

8

” (3.0 mm) drill bit for pilot holes

Pencil
Wire stripper or utility knife
Tape measure or ruler
Caulking gun and weatherproof caulking compound
Flat-blade screwdriver
Phillips screwdriver

■
■
■
■
■
■
■
■
■

Saber or keyhole saw
Metal snips
Compass or 8” (20.3 cm) circle template

Parts Supplied (all models)

4 - 3.5 x 9.5 mm mounting screws
T-10 Torx®† adapter

Parts Needed (all models)

3 - UL listed wire connectors
Vent clamps

For cabinets with recessed bottoms:

Two 2” (5.1 cm) wide filler strips. Length and thickness 

  determined by recess dimensions.

Four flat head wood screws or machine screws with washers 

  and nuts (to attach filler strips).

■
■
■

■
■

■
■

■

■

Models EFS130 (ducted installation)

Parts Supplied

2 - 3.5 x 9.5 mm screws.
3¹⁄

4

” x 10” (8.3 x 25.4 cm) rectangular vent connector.

Parts Needed 

Wall or roof cap to match vent system
1 - 75W max, 120V incandescent light bulb.
3¹⁄

4

” x 10” (8.3 x 25.4 cm) rectangular metal vent system

3¹⁄

4

” (8.3 cm) rectangular damper No return valve (optional) 

  Accessories part No. EXXNRVRT

Models ERS230 (ducted or non ducted  

(recirculation) installation)

Parts Supplied 

2 - 3.5 x 9.5 mm screws
3¹⁄

4

” x 10” (8.3 x 25.4 cm) rectangular vent connector

Parts Needed 

2 - 40W max, 120V incandescent light bulb
Wall or roof cap to match vent system

For 7” (17.8 cm) round vented installations:

7” (17.8 cm) round metal vent system
7” (17.8 cm) round vent mounting plate.  

  Accessories part. No. EXXTRK07

7” (17.8 cm) round damper non return valve (optional).  

  Accessories part No. EXXNRVRD

For 3¹⁄4” x 10” (8.3 x 25.4cm) rectangular vented installations:

3¹⁄

4

” x 10” (8.3 x 25.4 cm) rectangular metal vent system

3¹⁄

4

” (8.3 x 25.4 cm) rectangular damper No return valve. 

  (optional). Accessories part No. EXXNRVRT

For non-vented (recirculation) installations:

■
■

■
■
■
■

■
■

■
■

■
■

■

■
■

Recirculation kit. Accessories part No. ERSRCK30

Models ESN130 (non ducted [recirculation] installation)

Parts Needed 

1 - 75W max, 120V incandescent light bulb.

Models ENM230 / ENM236 (ducted or non ducted 

[recirculation] installation)

Parts Supplied

2 - 3.5 x 5 mm screws
3¹⁄4” x 10” (8.3 x 25.4 cm) rectangular vent connector with 

damper non return valve

Parts Needed

2 - 50W max, 120V halogen lamps
Wall or roof cap to match vent system

For 7” (17.8 cm) round vented installations:

7” (17.8 cm) round metal vent system
7” (17.8 cm) round vent mounting plate.  

  Accessories part. No. EXXTRK07

7” (17.8 cm) round damper non return valve (optional). 

Accessories part No.EXXNRVRD

For 3¹⁄4” x 10” (8.3 x 25.4cm) rectangular vented installations:

3¹⁄4” x 10” (8.3 x 25.4 cm) rectangular metal vent system

For non-vented (recirculation) installations:

Recirculation kit. ENM230 / ENM236: Accessories part No.  

  ENMRCK36 

■

■
■

■
■

■
■

■

■

■

†®TORX is a registered trademark of Saturn Fasteners, Inc.