5. USER SETTINGS
5 . 1 M e n u N a v i g a t i o n
In order to access the user settings menu and navigate through its content use the following
commands:
1. Enter user settings menu by pressing and holding the
key for 2.5 seconds.
2. Use the arrows
and
to go up and down.
3. Use
and
to save and change new settings.
4.
To exit the menu press
.
5 . 2 U s e r S e t t i n g s M e n u - O v e r v i e w
Table 5.1 presents the menu content as it appears in the scal
e’s main display and provides
information about how the various functions supported by S200 can be configured.
Menu Content
Description
1. Backlight
−−−
Switch backlight illumination ON/OFF.
>
2. Beeper
−−−
Switch beep sound ON/OFF.
>
3. Auto Power off
−−−
Auto Power Off adjustment. Setting is
in minutes from 0-60. When set to 0,
mode is OFF (Default setting is OFF)
−
4. Auto Sleep
mode
−−−
Auto Sleep adjustment. Settings from 0
to 200 seconds possible. When set to
0, mode is OFF (Default setting is OFF)
