29
English
4.
If the blade axis is blocked, the shredder compartment must be emptied. This requires
opening of the shredding chamber. The cover screen is
attached at its top with a star screw. Remove the star
screw and lower the cover.
Caution:
Always wear gloves when performing maintenance. You will be near the blades
when emptying the chipping chamber. They are razor-sharp and therefore
represent a real risk of cutting injuries. Take care and try to avoid all contact.
5.
Remove all the chips and wood residue from the shredding chamber.
Check regularly that
the passage in the blow chute is free from obstructions. Any obstructions must be removed
immediately. The groove in the black back plate of the blow chute allows you to press any
obstructions downwards with a tool and then remove them.
6. Remount the cover plate and check that it is done properly.
7.
In the event that a wood chip is blocking the impeller in the turbine, the turbine must be
cleared. Try first to remove the blockage the easy way: there is a
long groove in the cover of the blow chute. Using the handle of the
lever delivered with the machine, the lump that has formed in the
chute can be pressed down through the groove so that it falls in the
turbine casing and can be removed. (add photo) If this method fails,
the blow chute must be disassembled to remove the lump. In the
event that a wood chip is blocking the impeller in the turbine, the
turbine must be cleared. See Annex B1 - Clearing the turbine for the exact procedure.
8.
In the event of blockage of the blow chute, the chute must be disassembled to be able to
clear it. See Annex B2 – Disassembling the blow chute.
9.
Change your work method to ensure greater care to avoid jamming of the machine.
