42
English
Warning:
The blades are razor-sharp. Take extra care and avoid touching
the blades even if you wear very good gloves.
9.7.6 Moving the machine with a faulty engine
Since the drive hydraulic pump is driven by the petrol engine, all hydraulic functions will be non-
operational should the engine be faulty. The wheel drive is also hydraulic: Follow the steps below
to move the 450 kg shredder.
• This operation must be performed by at least 2 persons.
• Set the black control lever for the feed mechanism to the “STOP” position (position 1 or 3).
• Turn the control handle for the wheel drive to the required direction and simultaneously push
the machine forward.
• The machine can only be moved with diffi culty in this way. You will, after all, also feel the resist-
ance of the hydraulic drive components as well as the weight of the machine.
Warning:
Never apply this method on a slope. The machine may drive down the slope with
an uncontrollable speed. There is no brake function when there is no hydraulic
pressure. The parking brake is not dimensioned to stop at a short distance with
this weight
while on the move.
