Ligh-T
User Manual
All content is confidential. All rights reserved. 12
Maintenance
To maintain your Ligh-T station in an operational condition, regular inspections are mandatory:
-
Routine visual checks
: before and after each flight, as described in the pre-flight check list.
-
Quick Maintenance Process
: performed by the customer, every 50 hours of use, every 10 flights or
after any problem, even minor, as described below.
-
Global Maintenance Process
: performed by the manufacturer, every 200 hours of use, at the
manufacturer’s offices.
Quick Maintenance Process
Do not perform any maintenance while the Ligh-T system is plugged to an electrical source or to the
drone.
Micro-Tether
1-
Visually check the whole micro-tether condition and verify that it is free of wear or other alterations.
Ground Station
2-
Check that all parts on the Ligh-T are still secure.
3-
Check for rust or wear on the station.
Air Module
4-
Visually check the Air Module
5-
Visually and manually check all the connectors:
a.
Micro-Tether / drone: Mechanical fastener.
b.
Micro-Tether / Air Module: Power connector.
c.
Air Module / drone: Power connector.
If you notice any issue during the inspection of your Ligh-T, contact your dealer or ELISTAIR customer
service.
Support
At ELISTAIR, we rank customer satisfaction as our top priority and we will provide you with the highest
level of after-sales support.
For any technical assistance you might need, get in touch with our maintenance engineers at:
