www.elitalspa.com
MODULES EL60/IS - INSTRUCTION
2012
2
PATENTED “CAPILLARY COMB”
The revolution of the integrated photovoltaic roofing
Congratulations on purchasing modules EL60/IS (Integrated Structure) equipped with CAPILLARY
COMB frame. The absolute reliability of the system, produced entirely in Italy, is guaranteed by
the choice of high quality materials, as well as by multiple inspections performed throughout the
production process.
The "CAPILLARY COMB" frame, designed developed and manufactured by HELLER SpA is patented
in Europe and is mounted exclusively on EL60/IS modules produced by EL.ITAL. S.p.a. The modules
are certified to the requirements of the Extended Control IEC 61215 and are tested according to
IEC 61215 Extended Control as well as those of the safety standard IEC 61730.
The "CAPILLARY COMB" system is based on the concept of simplicity by giving to installers the
possibility to have a fast and effective training and to avoid as much as possible the errors during
the
assembly
stages.
The module frame with a particular single and inseparable shape, made up of multiple fins side
around the entire perimeter, which joined / spliced to each other in an installation of adjacent
photovoltaic modules of the same type guarantees the impermeability of the surface without the
use of additional components.
The fins are multiple and being overlapped to each other in order to create a continuous barrier
which does not allow the infiltration of water droplets in the lower part of the photovoltaic
surface but ensure the outflow into the lower end of the module frame.
The photovoltaic module EL60/IS equipped with CAPILLARY COMB framer removes and replaces
the conventional rooftop and is suitable to be used as architecturally integrated roof coverage.
The recommended installation requires a minimum angle of 10 ° (Tilt Angle)
This manual describes the installation, connection, maintenance of modules EL60/IS equipped
with CAPILLARY COMB frame. They are intended for specialized technicians who, thanks to their
professional skills, are familiar with the installation procedures. The installation and connection of
the modules must be performed only by properly trained and qualified personnel for installation
of this system. Before installation, the technical staff must read and understand these instructions
and follow them. It is compulsory to complete, sign and give the attached printable verbal to this
manual to the owner.
