background image

17

ELITE FITNESS TRIMLINE 1000 TREADMILL ASSEMBLY MANUAL

Warm up exercise is important in preparing the muscles for activity whilst minimising the risk 

of injury. You may choose to warm up with a light/brisk walking pace for 5-10 minutes before 

stopping and performing some simple stretches. (As shown in the pictures below)

 

Hamstring Stretch (Standing)

  

Keep your knees slightly bent and slowly lean forward, back and shoulders relaxed, reaching 

towards your toes. You should feel the tension and slight 

discomfort in your hamstring muscles. Hold for 15-20 seconds. 

Repeat 2-3 times.

 

Hamstrings Stretches (Seated)

  

Sitting on the floor preferably on a mat, put one leg straight, 

the other inward and close to the inside of the straight leg. 

Lean forward from the hips, reaching towards your toes. Hold 

for 10-15 seconds, and relax. Repeat 3 times for each leg (See 

picture 2).

 

Crus and Feet Tendon Stretches

  

Standing with two hands on the wall or tree, one leg behind. 

Keeping your legs straight and the heel on the ground, lean 

forward towards the wall or tree. Hold for 10-15 seconds, and 

relax. Repeat 3 times for each leg (See picture 3).

 

Quadriceps Stretches

  

Keeping your balance with your left hand holding onto a wall 

or stationery fixture, grasp your right foot with your right hand 

and stretch your right heel toward your buttocks slowly, until 

you feel the stretch in the front of your thigh. Hold for 10-15 

seconds, and relax. Repeat 3 times for each leg (See picture 4).

 

Sartorius (Inner Muscles of the Thigh) Muscle Stretches

  

Sitting down with the soles of your feet or shoes together and 

your knees positioned outward. Pull your feet towards your 

groin until you can feel the stretch. Hold for 10-15 seconds, and 

relax. Repeat 3 times (See picture 5).

WARM-UP EXERCISE

ELITE NERO ELLIPTICAL CROSSTRAINER MANUAL 

Summary of Contents for NERO























Reviews: