7
6
ELITE VO2 EXERCYCLE ASSEMBLY MANUAL
CHECK LIST
ASSEMBLY INSTRUCTIONS
GENERAL:
Remove all the parts of your cycle from the carton and place them on the floor carefully.
STEP 1: ATTACH THE MAIN FRAME
- Remove the pre-assembled 4 Allen head bolts (77), 2 curve washers (66) and 2 flat washers (65)
from the rear main frame (1).
- Attach the rear main frame (9) to the hole of main frame (1) and fasten with 2 flat washers (65), 2
curve washers (66) and 4 Allen head bolts (77).
STEP 2:
Attach the rear stabiliser (10) with 2 adjustment end caps to the welded cross bar bracket of Rear
main frame (9) and fasten with 2 flat washers(65), 2 spring washers (69) and carriages bolts (78).
Attach front stabiliser (11) with 2 transportation wheels to the welded cross bar bracket of main
frame (1) and fasten with 2 flat washers (65), 2 spring washers (69) and 2 carriage bolts (1).
