PARTS IDENTIFICATION
CONTROL PANEL
The controls are located on the front of the base. Turn dial to Pulse, Low or High in order
to select a function (see directions under "How to Use").
OFF CONTROL
Processor should be stored in OFF position and unplugged when not in use.
PULSE CONTROL
Use PULSE for short processing tasks. This lets you control the size and uniformity of
foods being chopped.
•
The dial must be turned to the Pulse position and held for the appliance to operate
in PULSE mode. When released, the dial will return to the OFF position and the
function will end.
•
The motor of the processor will run as long as the PULSE position is held. Hold the
dial in the PULSE position and then release to allow the blade to stop running and
the food to fall to the bottom of the bowl.
•
Pulsing gives better control when chopping, mincing, mixing and blending foods.
You can control the size of the foods, from coarse to fine.
SPEED LOW and HIGH CONTROL
This food processor has two speeds. Turn the dial to the appropriate speed when the
food is ready to be processed. When turned to one of these speeds, the processor will
continue to run until the dial is returned to the OFF position.
www.maxi-matic.com
3
info@maxi-matic.com
