Elite Screens CineGrey 5D Care And Use Download

Page: 3 / 3

Rev. 072318-BR

www.elitescreens.com

Notice to Installer:

Please use the following installation instructions to obtain superior optical performance from the CineGrey 5D

Angular Reflective ALR (Ambient Light Rejecting) Screen.

•

Angular-Reflective material is not compatible with ultra/short-throw projectors

• Minimum lens throw ratio 1.5x image width

• Ambient light must not come from the same direction as the projector

Since angular-reflective means that the projected image will reflect at the mirror-opposite angle, it is important to position

the projector so that the viewer will get the best possible image.

Step 1:

Establish the general “eye level” of the viewers

Step 2:

Set the appropriate projection level

Step 3:

Adjust the screen height level and projection angle

Input Angle

(A)

= Output Angle

(B)

aligns with the viewer’s angle

Summary of Contents for CineGrey 5D

Page 1: ...re using a staple or nail gun to stretch your material over a custom frame structure you can reinforce the puncture area with a duct tape strip to prevent tearing the material as its being stretched F...

Page 2: ...your existing frame however due to the nature of the polymers in some materials you may notice 1 A slight difference in screen size when rolled out This shrinkage is normal and it s due to the materi...

Page 3: ...ens throw ratio 1 5x image width Ambient light must not come from the same direction as the projector Since angular reflective means that the projected image will reflect at the mirror opposite angle...