2/3/2016
www.elitescreens.com
5
(6)
Fasten the remainder of the fix plates in the empty locations in the red markings to complete attaching the
screen material. (Fig.11)
Black backing for AcousticPro Models
This procedure only applies to AcousticPro models. Disregard this section if your Fixed Frame does not
include an acoustically transparent screen material. The purpose of the black backing material is to block out
any light penetration that may reflect off of anything mounted behind the screen, which can cause distortion to
the projected image.
Fig.10
Fig.11
Interval markings reveal the best points for inserting the fix plates (Fig.
12). The prongs on the fix plates insert to the lip on the back of the frame
creating a friction hold that will firmly keep the material and black
backing in place (Fig. 13-14).After the material has been installed, the
backing will lay over the back of the white (Acoustic) material and then
be held in place by the Velcro on the fix plates (Fig 15).
The black backing is held in place by the Velcro that is on the fix plates.
Black backing
Fix plates secure the Acoustic material and the black backing behind it.
I
J
K
L
M
N
O
P
(Fig. 12)
(Fig. 14)
(Fig. 13)
(Fig. 15)
