www.elitescreens.com
Limit switch adjustment instructions for Saker and
Saker Tab-Tension (SK/SKT) Series
Caution:
The screen’s top black drop is already set to its maximum drop distance by the
factory. There is
NO
extra black top drop in the roller. Attempting to increase the drop will
damage the motor and
VOID
your warranty with Elite Screens. Do not use these
instructions to try and get more out of your standard black masking drop. Please contact
Elite Screens before making any adjustments.
Tools required
: A 5/32 allen wrench is needed to adjust the limit screws.
Screen Limit Switch Description:
The limit adjustment screws are located on the power
cord side of the screen (as shown in the picture below). The drop adjustment screw is
accessible from the front of the screen through the hole shown below. The up adjustment
screw can be accessed from the opening of the screen from underneath.
Upper limit adjustment
hex screw
Lower limit adjustment
hex screw
