Updated 05/25/17
3
www.elitescreens.com
To increase the drop of the screen
(only applicable if the initial adjustment went too far):
Lower the
screen to its fullest extent, then insert the Allen wrench into the
lower limit adjustment screw
and
turn the limit screw
counterclockwise. (1 full turn equals about 1”) Bear in mind that the screen will
drop as you turn the Allen screw. (See next page for diagram)
To decrease the drop of the screen
:
Press the down button on the remote to lower the screen.
Insert
the Allen wrench into the
lower limit adjustment screw
and turn the limit screw
clockwise. (1 full turn
equals about 1”)
Note: The screen will not react when making this adjustment. You will need to raise the screen about
a third of the way and then drop it down again to see the difference in the adjustment.
For a local Elite Screens contact or Technical Support, please visit