7
ELT-KLCD EliteSuite Installation Manual
Figure 9 - Slave Keypad Standard Zone Wiring
PGM (Programmable Output)
The EliteSuite LCD Keypad uses a programmable output (PGM) that
will activate during an alarm condition. This output can be
programmed to either:
-
Follow the status of the alarm siren time or the fire alarm setting
-
Follow the armed / disarmed status of the keypad.
Connect a relay or other interface device to this open collector output
for activation of ancillary devices. The behaviour of this output can
also be inverted in the programming, see the General Options section
0 for details on PGM programming.
Figure 10 - LED Indicator Output
