Any Questions? Call Elite!
800-592-0548
Next, you will notice that the massage chair is shipped on a cardboard tray or base box.
5.
Cut the packaging tape on the front edge of the box so that you can lay the
box edge flat. This is to allow the chair to be rolled forward off the base box.
As the front edge of the base box is held upright with tape only, the box may
be easily used again if necessary for re-boxing by re-applying packaging tape
where cut.
The chair can now be removed from the base box via two methods. Refer to Step 6 for
solo removal of the chair from the base box, or skip to Step 7 for two-person removal.
6.
(Solo Removal) Roll chair out of box. Refer to the following diagram for
reference. The chair may be tilted back until the center of gravity is resting on
the rear wheels. Roll the chair out of the box and gently bring back to the
ground.
Use care not to damage the plastic cover at the rear of the chair.
