________________________________________________________________________
P a g e
| 6
1. Carefully remove your bike from the
box and the protective wrapping from
the bike to ensure you do not damage
the paint work.
2. Fit the front wheel into the wheel
drop-outs. Insert the quick release
assembly into the front wheel. Note the
correct orientation of the springs.
3. Remove the handlebar clamp from
the handlebar stem. Fit the handle into
the clamp on the stem, ensuring that the
splined section of the handlebar is
central in the clamp. Tightened the
bolts in the clamp until the handlebar
cannot be rotated.
4. Fit the front mud guard and the front
light onto the front fork. Connect the
two wires to the light. The black wire is
connected to the back of the light and
the black wire with a white stripe is
connected to the front connection.
5. Fit the seat to the bike. Note the
orientation of the seat clamp.
6. Fit the pedals to the cranks. Note
that the pedals have left and right hand
threads so if the pedal does not screw
into the crank it is for the opposite side.
ENSURE YOU CHECK ALL NUTS AND
BOLTS FOR TIGHTNESS
5.
SPECIFICATIONS
Frame
Specially designed aircraft grade lightweight aluminum 6061 frame
