Page 41 of 130
DOC No.
：
T202001006
The digital I/O should be constructed in compliance with IEC 61131-2. The electrical
specifications are shown below.
Terminal
Parameter Min Type
Max
Unit
Digital output
[DOUTx/ILOx]
Current
0 - 0.7
A
[DOUTx/ILOx]
Voltage drop
0 - 1
V
[DOUTx/ILOx]
Leakage current
0 - 0.1
mA
[DOUTx/ILOx]
Function
-
PNP
-
Type
[DOUTx/ILOx]
IEC 61131-2
- 1A -
Type
Digital input
[DINx]
Voltage
-3
- 30
V
[DINx]
OFF region
-2
- 2
V
[DINx]
ON region
8
- 30
V
[DINx]
Current (8-30V)
2
- 8.5
mA
[DINx]
Function
-
PNP -
Type
[DINx]
IEC 61131-2
-
3 -
Type
Digital input/safety input
[DINx /x_STOPx] Voltage
-10
- 26
V
[DINx /x_STOPx] OFF region 22
- 26
V
[DINx /x_STOPx] ON region -10
- 19 V
[DINx /x_STOPx] Current (-10V-19V)
1
- 10
mA
[DINx /x_STOPx] Function -
NPN - Type
[DINx /x_STOPx] IEC 61131-2
- 3 - Type
NOTE:
The word “Configurable” is intended for the input which may be
configured as the NPN input or PNP input.
