Page 19 of 130
Doc No.
：
T202001006
Chapter 2 Carrying and Cautions
When hoisting the robot, moving parts should be positioned with the appropriate measures, as
not to cause the unanticipated motion which may lead to harm accordingly during hoisting and
transportation. When packing and transporting, the robot should be packed in accordance with the
packing standards, and the required marks should be printed outside a packing box.
When transporting, the robot should be ensured to be stable and needs to be held and fixed at an
appropriate position.
The control box should be raised with a handle
When moving the robot to the installation position from the packing material of the robot, the
robot should be supported until all bolts of the robot base are tightened completely.
After fixing, the robot is powered on, and the pose of the robot should be adjusted to the
appropriate position with the dragged teaching function of the robot.
An original package should be kept upon completion of transportation. The packaging material
should stay dry, in case of repackaging the robot in the future.
1. Make sure that your back or other parts of the body are not overloaded when raising the
equipment.
2. All regional and national guides should be followed. Suzhou Elite Robot Co., Ltd. shall not
be responsible for damage generating during transportation .
3. Make sure that the robot is installed in strict accordance with the installation instructions in
the specification.
